Browse Categories
Price Ranges

Outback Motortek BMW F650/700/800GS Lower Crash Bars Matt Black

MSRP Price: $295.00
MX1WEST Price: $249.00
Part #: OBM-BMF800-LCB-BL

The ultimate, tested and proven protection for you BMW F800GS When BMW first came out with the F650/700/800GS models it was instantaneously a home run. High quality suspension, Rotax-BMW engineered engine, spoked wheels, best-in-class ground clearance etc. With such features it was no surprise that the "little" GS became the ultimate ADV machine alongside its big brother, the 1200GS. Therefore, Outback Motortek was looking at some serious challenges to match the bike's legendary reputation. As always, our team has done its best create a crown jewel for any BMW F800GS/GSA and proud to present their final creation.

  • Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance.
  • Quality 27mm/1.06″ steel tube with 2mm wall thickness – any low quality steel tubing BELOW THESE SPECS will be crushed when your 450lbs bikes crashes into the ground. Our crash bars will take the beat!
  • Less is often more. We didn’t try to cover the whole entire bike with crash bars that look like a cobweb. The F700/800GS models have very few tough mounting points, thus it makes more sense to create one solid and compact crash bar that stays close to the few mounting points instead of being far spread out that results in an overly flexible and “soft” structure. It will do more damage to your GS! Our compact and tough crash bars are the only way to go here to truly protect your BMW’s expensive and fragile parts.
  • Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 4mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that”s worth thousands of dollars.
  • Stainless Steel Hardware – These bolts and nut will always and forever look nice and shiny. Unless your bike is covered in mud and dust…
  • Sandblasted to achieve the best possible adhesion of the coatings – it”s an extremely vital part of our manufacturing process. Sandblasted surfaces will withstand most surface scratches and give you a longer-lasting product.
  • Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!

8 reasons why you should invest in the right crash bars - By Lorry G.

Crash bars or some call it engine guards and adventure motorcycles go hand in hand. The question is not whether will you drop you bike but more like when will you drop your bike? Essentially you need a set of crash bars!

Protective motorcycle armor has been around for decades. Some make real good, functional and attractive looking ones. Some just don’t get all the above features right. On top of that, some try it too hard and come out with bogus products just to jump on the “adventure bike accessories” bandwagon. Read below the eight reasons why you need a decent set of crash bars.

  1. Long Term Savings – Call your motorcycle dealer and ask for a quote on the following parts: radiator, fuel tank fairings, fuel tank, turn signals. Guaranteed you will have to sit down to digest the price tag your local motorcycle dealer shoves down your throat. To put this into actual numbers, at least $1500-$3000 depending on the brand you own. Don’t forget to add the mechanic’s charges to the bill…How does a $300 investment into a set of crash bars sound like?
  2. Look – A lot of guys treat their bikes like their wives/girlfriends. Some even better but let’s not get into that. I’m safe to assume that making your bike look awesome and adventure-ready is just as important. After all, you’ll want to show it off in front of your buddies.
  3. Structural Design – In my humble opinion, there are more crash bars on the market that don’t work than the ones that do. Why? Poor structural design. Just because one adds a “ton” of metal tubes all across the crash bars and make it look like a cobweb, it won’t work better. It will result in excessive weight, vibration(!) and could very well crush your bike’s expensive plastic parts, crack the frame or rip mounts off the engine during an impact. Raising your crash bars up too high to try to protect the fuel tank is a disaster waiting to happen. The further the protective armor reaches away from the mounting points, the more flexible it becomes. As long as you don’t crash your bike, you’ll be fine. The headache begins when you lose control over your bike while riding on a trail and you sure better let that beast go and give in to gravity. It’s not rocket science that when a 500lbs+ bike hits the ground there will be some serious impact and with that impact there will be some serious damage. If you’ve got the right crash protection, then you will most likely be able to ride on. If you don’t, then better have a buddy with a pickup truck or AAA platinum card. Outback Motortek believes in the less-is-more philosophy, therefore we design and make compact crash bars.
  4. Quality Hardware – Small thing but could be a real nuisance not to pay attention to. We use 8.8, 10.9 or even 12.9 grade galvanized or stainless steel bolts and place them where they best suit their purpose.
  5. Mounting tabs or pieces are as essential as wheels for cars. They are the strongest and most essential links between the protective armor and bike’s chassis and/or engine. These parts must absorb the last piece of impact. What’s even more important that in some cases they need to able to bend to prevent the energy from the impact to be transferred onto the frame or engine.
  6. Surface Treatment – Are we talking about show bikes or adventure bikes for off-roading? If you think your bike is the latter, then you might want to opt for a durable and no frills surface. Outback Motortek chooses to sandblast all their products to create an adhesive surface before powder coating. Sandblasting is certainly key in creating a surface that withstands a lot of abuse from riding off-road. Most manufacturers choose only the powder coating option and some choose the fancier anodizing.
  7. Fitment – The majority of crash bars are hand-made or hand-finished, therefore there is always the chance to make errors. Regardless, there are manufacturers that make better fitting products than others. Fitting should be part of quality control, before and after welding the crash bar components. We follow up with this and run a series of tests during the manufacturing process to make one of the best fitting crash protection in the market.
  8. Warranty, customer service – Warranty is an insurance that customers pay when purchasing products. Outback Motortek offers warranty for its customers given that the product in question failed due to material or manufacturing error. If you beat up your crash bars while off-roading and your bike remains intact, we will invite you for a six pack or a bottle of wine of your choice. Just send us some epic shots of your adventure(s).

Product Reviews

(0 Ratings, 0 Reviews)